Skip to content

The only one that says which three jobs its tool does

SGILE Twelve-piece kit with a crimp, cut and strip tool for 8P, 6P and 4P

The one kit on this shelf that says what its three-in-one tool actually does — crimp, cut and strip — and the one that prints the position notation its dies hold rather than a list of connector names.

SGILE network tool kit with a three-in-one crimping tool, cable tester and punch-down tool

SGILE Twelve-piece kit with a crimp, cut and strip tool for 8P, 6P and 4P

The one kit on this shelf that says what its three-in-one tool actually does — crimp, cut and strip — and the one that prints the position notation its dies hold rather than a list of connector names.

Connector positions supported
8P, 6P and 4P — stated in the second bullet, and written again as 8P8C, 6P6C and 4P4C. RJ45, RJ11 and RJ12 are named alongside them, with Cat5 and Cat5e cable
Pass-through capability
Not published on the listing — nothing describes a blade that trims conductors flush with the front of a plug, and the term never appears
Ratchet action
Not published on the listing — the fourth bullet describes ergonomically shaped tools for comfortable and secure operation, and no lock or release mechanism is named
Integrated stripper
Yes — stated in the second bullet, which names the tool as a three-in-one crimping, cutting and stripping tool. It is the only listing on this shelf to name all three functions of its own tool
Integrated cutter
Yes — stated in the same phrase, as the cutting function of the three-in-one tool
Replaceable blades
Not published on the listing — no blade is described as removable and no spare is listed. Two stripping knives, marked 58/59 and 501, are supplied as separate items
Punch-down tool included
Yes — a punch-down tool is listed in the first bullet. No blade type is named
Kit contents
Three-in-one crimping tool, network cable tester, stripping knives marked 58/59 and 501, punch-down tool, 10 RJ45 plugs, crosshead and flat screwdrivers, a yellow mini knife, one 9 V battery stated as 6F22 and not lithium-based, instructions and a sturdy zipped tool bag — stated
Amazon reference
B071CDLMGG (same reference on 5 Amazon marketplaces)
EAN
0603803325488
  • Names the three functions of its crimping tool, which nothing else on this shelf does
  • Prints the position notation the dies hold rather than only the connector names
  • No ratchet described, on a kit sold for repeat work

Best for: A first kit for someone who wants to know what the tool in it actually does before opening the bag.

≈ £19 / 18 €
Check price on Amazon

Specifications

Connector positions supported
8P, 6P and 4P — stated in the second bullet, and written again as 8P8C, 6P6C and 4P4C. RJ45, RJ11 and RJ12 are named alongside them, with Cat5 and Cat5e cable
Pass-through capability
Not published on the listing — nothing describes a blade that trims conductors flush with the front of a plug, and the term never appears
Ratchet action
Not published on the listing — the fourth bullet describes ergonomically shaped tools for comfortable and secure operation, and no lock or release mechanism is named
Integrated stripper
Yes — stated in the second bullet, which names the tool as a three-in-one crimping, cutting and stripping tool. It is the only listing on this shelf to name all three functions of its own tool
Integrated cutter
Yes — stated in the same phrase, as the cutting function of the three-in-one tool
Replaceable blades
Not published on the listing — no blade is described as removable and no spare is listed. Two stripping knives, marked 58/59 and 501, are supplied as separate items
Punch-down tool included
Yes — a punch-down tool is listed in the first bullet. No blade type is named
Kit contents
Three-in-one crimping tool, network cable tester, stripping knives marked 58/59 and 501, punch-down tool, 10 RJ45 plugs, crosshead and flat screwdrivers, a yellow mini knife, one 9 V battery stated as 6F22 and not lithium-based, instructions and a sturdy zipped tool bag — stated
Amazon reference
B071CDLMGG (same reference on 5 Amazon marketplaces)
EAN
0603803325488

On the listing

A twelve-in-one network repair kit containing a three-in-one crimping, cutting and stripping tool, a network cable tester, stripping knives marked 58/59 and 501, a punch-down tool, ten RJ45 plugs, crosshead and flat screwdrivers, a yellow mini knife, a 9 V battery given as type 6F22 and stated to be non-lithium, an instruction sheet and a zipped tool bag. The second bullet states the tool crimps, cuts and strips 8P, 6P and 4P plugs, naming RJ45, RJ11 and RJ12 and the 8P8C, 6P6C and 4P4C bodies, with Cat5 and Cat5e cable. The third describes a tester covering RJ11, RJ12, RJ45, CAT5, CAT5e, 10/100BaseT, TIA-568A and 568B and AT&T 258-A, with lamps one to eight and a ground indicator. The fourth describes ergonomic shaping, and the fifth a compact zipped bag.

The sentence the rest of this shelf leaves out

Crimp, cut and strip. Four listings in this hub sell a three-in-one tool without ever saying what the three are; this one says it in the second bullet and then repeats the positions the dies hold.

That single phrase fills three of the eight lines this hub compares — the stripper, the cutter, and by extension what the tool is for. A buyer does not have to open the box to know whether the sheath can be taken off with the same object that crimps the plug. It is a small piece of writing and it does more work than the entire fourth bullet.

Positions rather than nicknames

8P8C, 6P6C, 4P4C. That notation counts positions and contacts, and it is what a die is actually cut for. The popular names — RJ45, RJ11, RJ12 — are a shorthand that has drifted from its origins, and a tool listing that gives both is a tool listing that knows the difference.

Two kits on this shelf print it. Four name connector families and stop, which leaves a reader to assume that a tool sold for RJ45 must have a die for the smaller bodies as well. Sometimes it does; this one says so.

The tester, and its battery

The tester is described in more detail than anything else in the bag, down to the eight numbered lamps and the ground indicator, and the battery is supplied and identified by its designation rather than by a shape. That last detail is worth more than it sounds: a tester that arrives without a battery is a tester that cannot be used on the day it arrives, and a battery named by type is one that can be reordered correctly.

What the tester is not is an instrument that measures. It proves continuity and pin order. Length, split pairs and category performance are a different class of tool and a different hub on this site.

The mechanism, still unnamed

There is no ratchet on this page. The fourth bullet talks about ergonomic shaping and comfortable operation, which is a description of the handles rather than of the crimp. A tool without a lock delivers whatever force the hand applies, and the second and third crimps of an afternoon are not the same as the first.

Two tools on this shelf describe a mechanism. This is not one of them, and the price sits at the bottom of the shelf.

Before ordering

Take this for what it says it is: a well-described starter bag with a tool whose three jobs are named and a tester that arrives working. Then check the plugs. Nothing here says the tool trims pass-through plugs, and the ten supplied are not described as pass-through either, so buy standard plugs to go with it unless the seller confirms otherwise.

Availability

Priced from 18 € to 27 € across the German, French, Italian and Spanish Amazon stores the day this page was checked.

It is stocked on the British Amazon store as well, in that country’s own currency. The range above leaves those out: it counts euro stores and no others.

The American Amazon store returned nothing at all, so the buy button there opens a search in that country rather than a page that would not load.

Every figure in this section is what Keepa held on the day this page was last updated. Stock and prices move without warning.

Prices quoted in this text were read on 10 September 2026. The live price is at the top of the page.

More crimping tools

  • Xespis network tool kit with crimping tool, cable tester, stripper and punch-down tool in a zipped bag

    Xespis Twelve-piece network tool kit with a three-in-one crimping tool and a tester

    The cheapest way onto this shelf: a bag holding a three-in-one crimping tool, a continuity tester, a stripper and a punch-down tool — described in a bullet that the listing then prints again, word for word, at the bottom of the page.

    Connector positions supported
    The connector families are named and the position counts are not: RJ-11, RJ-12 and RJ-45 appear in the second bullet alongside CAT5, CAT5e and TIA-568A/568B. The 8P8C, 6P6C and 4P4C notation that would say what the dies hold is not printed
    Pass-through capability
    Not published on the listing — the tool is called a three-in-one crimping tool throughout and nothing says whether it trims conductors flush at the front of a plug
    Ratchet action
    Not published on the listing — no ratchet, lock or release is described, and the bullets discuss the contents of the bag rather than the mechanism of the tool
    Integrated stripper
    Not published on the listing as part of the crimping tool — the three-in-one is never broken down into its three jobs. What is stated is a separate stripping tool supplied in the same bag
    Integrated cutter
    Not published on the listing for the same reason — the three functions of the crimping tool are never named, and no cutter is described on the tool itself
    Replaceable blades
    Not published on the listing — no blade is described as removable, and no spare is listed among the contents
    Punch-down tool included
    Yes — an insulation-displacement insertion tool is listed in the first and fifth bullets. No blade type is named for it
    Kit contents
    Three-in-one crimping tool, network cable tester, stripping tool, punch-down tool, 10 RJ45 plugs, 10 protective boots, a crosshead screwdriver, a flat screwdriver, a yellow mini knife, instructions and a tool bag — stated. The same list appears twice, as the first bullet and again as the fifth
    Amazon reference
    B0BVFL3KZD (same reference on 5 Amazon marketplaces)
    EAN
    0640711476918
    • A punch-down tool is in the bag, which two kits on this shelf leave out
    • Plugs and boots are supplied, so a first lead can be made without a second order
    • The three jobs of the three-in-one tool are never named, so three of the eight lines here stay empty

    Best for: A first network kit for someone terminating a handful of leads and a couple of modules, who wants everything in one bag.

    ≈ 17 €
    Check price on Amazon
  • Yavinane pass-through network tool kit with crimping tool, tester, punch-down tool and plugs

    Yavinane Pass-through kit with twenty Cat7 and Cat6a plugs, tester and LSA Plus punch-down tool

    The only kit here whose supplied plugs match the capability of its tool — twenty pass-through plugs given a category and a plating thickness — with a punch-down tool named by its blade family rather than left generic.

    Connector positions supported
    8P8C, 6P6C and 4P4C — stated in the second bullet, alongside RJ45, RJ12 and RJ11. It is one of two kits on this shelf to print the position notation
    Pass-through capability
    Yes — stated in the title and in two bullets, where the pass-through design is credited with letting the wiring be checked twice and with preventing accidental contact between conductors
    Ratchet action
    Not published on the listing — no lock, ratchet or release is described anywhere in the five bullets
    Integrated stripper
    Not published on the listing as part of the crimping tool — the tool is called a three-in-one crimping tool without its three jobs being named. A separate stripping tool is supplied in the bag
    Integrated cutter
    Not published on the listing for the same reason — a separate wire cutter is listed among the contents, and no cutting function is described on the crimping tool itself
    Replaceable blades
    Not published on the listing — no blade is described as removable and no spare is included
    Punch-down tool included
    Yes — an LSA Plus punch-down tool is listed in the first bullet, named by its blade family rather than described in general terms
    Kit contents
    One RJ45 crimping tool, 20 pass-through plugs stated as Cat7 and Cat6a, 20 boots, one stripping tool, one wire cutter, one LAN tester, one LSA Plus punch-down tool and a zipped bag — stated. The third bullet gives the plug contacts a gold plating of 50 microns
    Amazon reference
    B0GWDRVHW5 (same reference on 6 Amazon marketplaces)
    EAN
    0753504441908
    • The plugs in the box are pass-through, matching what the tool is built to finish
    • The punch-down tool is named by its blade family instead of being left generic
    • The three jobs of the crimping tool are never named, leaving two lines here empty

    Best for: A first pass-through kit, where the tool, the plugs and the punch-down tool all arrive matched in one bag.

    ≈ £37 / 30 €
    Check price on Amazon
  • Fortura RJ45 crimping tool with plugs, insertion guides, boots and a replacement blade

    Fortura All-in-one crimping tool with twenty plugs, twenty guides, twenty boots and a spare blade

    The one kit in this hub that ships a replacement blade, packed with twenty plugs split across two categories and twenty insertion guides — and the dearest tool on the shelf.

    Connector positions supported
    Not published on the listing — the second bullet names cable categories and connector families instead: Cat5, Cat6, Cat6a and Cat7, with RJ11 and RJ12 telephone plugs. No position count is printed
    Pass-through capability
    Not published on the listing — the third bullet describes an optimised crimping mechanism and firm, loss-free connections, and never mentions trimming conductors at the front of a plug
    Ratchet action
    Not published on the listing — the optimised crimping mechanism in the third bullet is named without any lock, ratchet or release being described
    Integrated stripper
    Yes — stated in the first bullet as cutting, stripping and crimping with a single tool
    Integrated cutter
    Yes — stated in the same phrase as the cutting function of the tool
    Replaceable blades
    Yes — a replacement blade is listed in the fourth bullet among the accessories supplied. It is the only spare blade in this hub, and the trimming edge is the part of a tool of this kind that dulls first
    Punch-down tool included
    Not published on the listing — no punch-down or insertion tool appears among the accessories, and modules and panels are never mentioned
    Kit contents
    Ten Cat6a plugs, ten Cat7 plugs, twenty insertion guides, twenty boots, a replacement blade and a storage bag — stated in the fourth bullet. The fifth describes a solid metal frame and a non-slip grip that can be worked single-handed
    Amazon reference
    B0D5MCDFCD (same reference on 3 Amazon marketplaces)
    EAN
    4260751370272
    • The only kit in this hub with a spare blade in the box
    • Twenty insertion guides, one per plug, rather than a handful
    • No position count anywhere, only category and connector names

    Best for: Terminating plugs across two categories of cable, by someone who already owns a tester and a punch-down tool.

    ≈ £42 / 40 €
    Check price on Amazon

Others worth having spare

  • SABRENT flat docking station with an M.2 slot and a SATA drive bay

    SABRENT flat dock for M.2 NVMe and 2.5/3.5-inch SATA, USB-C at 10 Gbps, offline clone, M.2 heatsink

    The only dock in this hub that reads an M.2 module and a conventional SATA drive at the same time, which is exactly the pair of things a machine being retired usually contains.

    Bay count
    Two positions of different kinds — one M.2 slot and one SATA bay, described in the first bullet as supporting M.2 PCIe NVMe SSDs and 2.5-inch or 3.5-inch SATA SSDs and HDDs at the same time. The third bullet says it can be run in single-drive or dual-drive mode
    Supported drive sizes
    2.5-inch and 3.5-inch SATA drives, and M.2 modules — stated in the title and in the first bullet. The individual M.2 lengths are not published on the listing
    Supported drive interfaces
    M.2 PCIe NVMe, and SATA SSDs and hard discs — stated in the title and in the first bullet. Whether the M.2 position also accepts M.2 SATA modules is not published
    Solid-state slot support
    An M.2 slot with a heatsink and an integrated thermal pad — stated in the title and in the fourth bullet, which gives keeping the hardware cool and protected as the reason. It is one of two docks on this shelf with an M.2 position and the only one that pairs it with a SATA bay
    Offline cloning
    Stated — the first and third bullets both describe cloning offline between two drives, with the third adding that the dock can be operated in single-drive or dual-drive mode for transfers. No press duration and no capacity rule is published
    Interface standard
    USB 3.2 Gen 2 — stated in the second bullet, which adds that the dock is backward compatible
    Stated link rate
    Up to 10 Gbps with a suitable USB host port — stated in the second bullet. The host-port clause is the only condition of its kind published on this shelf, and it is one of three in the whole lot
    Connector type
    Type-C — stated in the title and in the first bullet, which calls it a USB Type-C flat docking station. No cable is named
    UASP support
    Stated — the second bullet names both TRIM and UASP, giving reliability and performance as the reasons
    Power supply
    Not published on the listing — no adapter, voltage or current is named, on a dock that accepts a 3.5-inch drive and therefore cannot run from a USB port alone
    Per-bay controls
    Not published on the listing as per-bay — the fourth bullet names LED indicators keeping the user informed during all operations, and no switch and no individual position control is described
    Amazon reference
    B0BX4LSHS4 (same reference on 6 Amazon marketplaces)
    EAN
    0840025259089
    • Reads an M.2 module and a SATA drive at the same time, which nothing else here does
    • Writes the host-port condition into its own 10 Gbps claim
    • No power supply named, on a dock that accepts a 3.5-inch mechanism

    Best for: Retiring a computer, where the M.2 system drive and the SATA data drive both have to be read and one copied to the other.

    ≈ $63 / £66 / 68 €
    Check price on Amazon
  • UGREEN black dual-bay drive docking station with two slots and a clone button

    UGREEN dual-bay SATA dock, USB 3.0 at 5 Gbps, offline clone, UASP, S.M.A.R.T. and TRIM, 2 × 16 TB

    A two-bay dock that puts the cloning rule in bold inside its own first bullet — the destination has to exceed the source — and publishes three protocols where most docks publish one.

    Bay count
    Two — stated in the title and in the second bullet, which describes simultaneous operation of two 2.5-inch or 3.5-inch drives for synchronous data transfer
    Supported drive sizes
    2.5-inch and 3.5-inch — stated in the first and second bullets
    Supported drive interfaces
    SATA hard discs and solid-state drives — stated in the first and second bullets. No SATA revision is named
    Solid-state slot support
    Not published on the listing — no M.2 position is named. Solid-state drives are supported in the two SATA bays and no separate slot exists
    Offline cloning
    Stated — the first bullet describes fast copying between two drives at a single button press with no computer connected, and adds in a marked note that the capacity of destination drive B must exceed that of source drive A
    Interface standard
    USB 3.0 — stated in the title and in the third bullet
    Stated link rate
    Up to 5 Gbps — stated in the title and in the third bullet, which calls it a theoretical transfer speed
    Connector type
    Not published on the listing — no socket and no cable is named in any bullet
    UASP support
    Stated — the third bullet names UASP, S.M.A.R.T. and TRIM together as the protocols supported. It is one of two docks on this shelf to name all three
    Power supply
    Not published on the listing — no adapter, no voltage and no current is named, on a dock stated to run two 3.5-inch drives at once
    Per-bay controls
    Not published on the listing — no power switch and no per-bay indicator is named in any bullet
    Amazon reference
    B0FPM32XNZ (same reference on 5 Amazon marketplaces)
    EAN
    6941876284924
    • Puts the capacity rule for cloning inside the cloning bullet, in a marked note
    • UASP, S.M.A.R.T. and TRIM all three published
    • No power supply named, on a dock built for two 3.5-inch drives

    Best for: Moving a system onto a larger drive, where the capacity rule in the first bullet is exactly the thing that has to be got right.

    ≈ 24 €
    Check price on Amazon
  • Xiaobi dual-bay drive docking station with RGB lighting and two drive slots

    xiaobi dual-bay SATA dock, USB-C and USB-B, USB 3.0 at 5 Gbps, offline copy, RGB switch

    The dock that describes its own failure state — four blue lights blinking means the copy did not work — and the only one here with a switch to turn its lighting off.

    Bay count
    Two — stated in the title and in the first bullet, which describes two SATA drive interfaces alongside a Type-C socket, a USB-B socket and separate power and RGB buttons
    Supported drive sizes
    2.5-inch and 3.5-inch — stated in the title and in the third bullet
    Supported drive interfaces
    SATA hard discs and solid-state drives — stated in the third bullet. No SATA revision is named
    Solid-state slot support
    Not published on the listing — no M.2 position is named. Solid-state drives are supported in the two SATA bays and no separate slot exists
    Offline cloning
    Stated — the second bullet describes copying from one SATA drive to another with a switch and no software or tools, and adds three marked notes: use a larger destination, disconnect the PC during the copy, make sure the destination capacity is at least as large as the source, and read four blinking blue LEDs as a failed copy
    Interface standard
    USB 3.0 — stated in the fourth bullet as supporting extremely fast USB 3.0 data transfer
    Stated link rate
    Up to 5 Gbit/s — stated in the fourth bullet
    Connector type
    A Type-C socket and a USB-B socket on the dock, with a USB-B to USB-C cable and a USB-A adapter supplied — stated in the first and sixth bullets. It is the only dock on this shelf to publish both its sockets and its cable
    UASP support
    Not published on the listing — UASP is not named anywhere in the six bullets. Fourteen of the nineteen listings in this lot publish it, so the silence is worth noticing
    Power supply
    Not published on the listing — no adapter, no voltage and no current is named, on a dock stated to take two 3.5-inch drives
    Per-bay controls
    Separate power and RGB buttons are stated in the first bullet, with the RGB switch on the rear named again in the fifth. Neither is per-bay: no individual bay switch and no per-bay indicator is published
    Amazon reference
    B0GGR3P52T (same reference on 6 Amazon marketplaces)
    EAN
    0635393178823
    • Describes the failure signal, four blinking blue lights, which nothing else in this lot does
    • Publishes both its sockets and the cable and adapter supplied
    • Two capacity figures in one bullet, 16 TB each and 20 TB for a single drive

    Best for: A desk where drives are copied often and the operator wants to know from across the room whether it worked.

    ≈ $35 / £27 / 25 €
    Check price on Amazon

All crimping tools