Skip to content

Twelve in the name, eleven in the list, printed twice

Xespis Twelve-piece network tool kit with a three-in-one crimping tool and a tester

The cheapest way onto this shelf: a bag holding a three-in-one crimping tool, a continuity tester, a stripper and a punch-down tool — described in a bullet that the listing then prints again, word for word, at the bottom of the page.

Xespis network tool kit with crimping tool, cable tester, stripper and punch-down tool in a zipped bag

Xespis Twelve-piece network tool kit with a three-in-one crimping tool and a tester

The cheapest way onto this shelf: a bag holding a three-in-one crimping tool, a continuity tester, a stripper and a punch-down tool — described in a bullet that the listing then prints again, word for word, at the bottom of the page.

Connector positions supported
The connector families are named and the position counts are not: RJ-11, RJ-12 and RJ-45 appear in the second bullet alongside CAT5, CAT5e and TIA-568A/568B. The 8P8C, 6P6C and 4P4C notation that would say what the dies hold is not printed
Pass-through capability
Not published on the listing — the tool is called a three-in-one crimping tool throughout and nothing says whether it trims conductors flush at the front of a plug
Ratchet action
Not published on the listing — no ratchet, lock or release is described, and the bullets discuss the contents of the bag rather than the mechanism of the tool
Integrated stripper
Not published on the listing as part of the crimping tool — the three-in-one is never broken down into its three jobs. What is stated is a separate stripping tool supplied in the same bag
Integrated cutter
Not published on the listing for the same reason — the three functions of the crimping tool are never named, and no cutter is described on the tool itself
Replaceable blades
Not published on the listing — no blade is described as removable, and no spare is listed among the contents
Punch-down tool included
Yes — an insulation-displacement insertion tool is listed in the first and fifth bullets. No blade type is named for it
Kit contents
Three-in-one crimping tool, network cable tester, stripping tool, punch-down tool, 10 RJ45 plugs, 10 protective boots, a crosshead screwdriver, a flat screwdriver, a yellow mini knife, instructions and a tool bag — stated. The same list appears twice, as the first bullet and again as the fifth
Amazon reference
B0BVFL3KZD (same reference on 5 Amazon marketplaces)
EAN
0640711476918
  • A punch-down tool is in the bag, which two kits on this shelf leave out
  • Plugs and boots are supplied, so a first lead can be made without a second order
  • The three jobs of the three-in-one tool are never named, so three of the eight lines here stay empty

Best for: A first network kit for someone terminating a handful of leads and a couple of modules, who wants everything in one bag.

≈ 17 €
Check price on Amazon

Specifications

Connector positions supported
The connector families are named and the position counts are not: RJ-11, RJ-12 and RJ-45 appear in the second bullet alongside CAT5, CAT5e and TIA-568A/568B. The 8P8C, 6P6C and 4P4C notation that would say what the dies hold is not printed
Pass-through capability
Not published on the listing — the tool is called a three-in-one crimping tool throughout and nothing says whether it trims conductors flush at the front of a plug
Ratchet action
Not published on the listing — no ratchet, lock or release is described, and the bullets discuss the contents of the bag rather than the mechanism of the tool
Integrated stripper
Not published on the listing as part of the crimping tool — the three-in-one is never broken down into its three jobs. What is stated is a separate stripping tool supplied in the same bag
Integrated cutter
Not published on the listing for the same reason — the three functions of the crimping tool are never named, and no cutter is described on the tool itself
Replaceable blades
Not published on the listing — no blade is described as removable, and no spare is listed among the contents
Punch-down tool included
Yes — an insulation-displacement insertion tool is listed in the first and fifth bullets. No blade type is named for it
Kit contents
Three-in-one crimping tool, network cable tester, stripping tool, punch-down tool, 10 RJ45 plugs, 10 protective boots, a crosshead screwdriver, a flat screwdriver, a yellow mini knife, instructions and a tool bag — stated. The same list appears twice, as the first bullet and again as the fifth
Amazon reference
B0BVFL3KZD (same reference on 5 Amazon marketplaces)
EAN
0640711476918

On the listing

A twelve-in-one network tool kit whose contents are given as a three-in-one crimping tool, a network cable tester, a stripping tool, an insulation-displacement insertion tool, ten RJ45 plugs, ten protective boots, a crosshead screwdriver, a flat screwdriver, a yellow mini knife, an instruction sheet and a tool bag. The second bullet names what it is offered for: RJ-11, RJ-12, RJ-45, CAT5, CAT5e and the TIA-568A and 568B wiring orders. The third describes installing network adapters, repairing cable and testing networks at home, in an office, a laboratory, a hall of residence or a workshop. The fourth names the materials as hard alloy and ABS plastic. The fifth repeats the contents list of the first, word for word.

What is in the bag, counted

Eleven entries in the list, twelve in the name. One of the eleven is itself described as three-in-one, which is a plausible route to the larger figure and is not one the listing ever walks. This page counts what is written and leaves the arithmetic where the maker left it.

What matters more is the shape of the collection. A crimping tool, a stripper, a tester and a punch-down tool cover the four operations a small copper installation needs: prepare the cable, fit a plug, fit a module, prove the link. Ten plugs and ten boots mean the first lead can be made on the day the box arrives. Two kits on this shelf have no punch-down tool at all, and a punch-down tool is what a keystone module wants.

The three jobs that are never named

The crimping tool is called three-in-one in the first bullet, in the fifth bullet, and nowhere else. What the three jobs are is never written down.

That single omission empties three of the eight lines this hub compares. Whether the tool strips, whether it cuts, whether either of those blades can be changed: all unanswerable from the page. One kit on this shelf names its three functions explicitly — crimp, cut and strip — and the difference between the two listings is one sentence.

The mechanism, unmentioned

No ratchet appears anywhere. A ratcheting tool refuses to open until the crimp has been completed, which removes the commonest cause of an intermittent link — a crimp that felt finished and was not. A non-ratcheting tool depends entirely on the hand holding it.

The listing does not say which this is, and this page will not infer one from a price. What can be said is that the two tools on this shelf that describe a mechanism at all describe it deliberately, and this is not one of them.

The bullet printed twice

The first and fifth bullets are identical. A listing has five slots to say what a product is, and this one spends two of them saying the same thing.

Counted honestly, that leaves four bullets, and the missing fifth is where the ratchet, the three functions, or the position counts of the dies could have gone.

Before ordering

Treat this as a kit rather than as a tool: the value is in having a punch-down tool, a tester, a stripper and plugs in one bag on the first day. Then read the plugs you intend to use against it — if they are pass-through, nothing on this page says this tool can trim them, and a pass-through plug finished with a tool that cannot trim is a plug with eight conductors standing out of the front.

Availability

Priced from 17 € to 25 € across the German, French, Italian and Spanish Amazon stores the day this page was checked.

In the British Amazon catalogue with no live offer against it: the reference exists, nobody is filling it.

The American Amazon store returned nothing at all, so the buy button there opens a search in that country rather than a page that would not load.

Every figure in this section is what Keepa held on the day this page was last updated. Stock and prices move without warning.

Prices quoted in this text were read on 10 September 2026. The live price is at the top of the page.

More crimping tools

  • Yavinane pass-through network tool kit with crimping tool, tester, punch-down tool and plugs

    Yavinane Pass-through kit with twenty Cat7 and Cat6a plugs, tester and LSA Plus punch-down tool

    The only kit here whose supplied plugs match the capability of its tool — twenty pass-through plugs given a category and a plating thickness — with a punch-down tool named by its blade family rather than left generic.

    Connector positions supported
    8P8C, 6P6C and 4P4C — stated in the second bullet, alongside RJ45, RJ12 and RJ11. It is one of two kits on this shelf to print the position notation
    Pass-through capability
    Yes — stated in the title and in two bullets, where the pass-through design is credited with letting the wiring be checked twice and with preventing accidental contact between conductors
    Ratchet action
    Not published on the listing — no lock, ratchet or release is described anywhere in the five bullets
    Integrated stripper
    Not published on the listing as part of the crimping tool — the tool is called a three-in-one crimping tool without its three jobs being named. A separate stripping tool is supplied in the bag
    Integrated cutter
    Not published on the listing for the same reason — a separate wire cutter is listed among the contents, and no cutting function is described on the crimping tool itself
    Replaceable blades
    Not published on the listing — no blade is described as removable and no spare is included
    Punch-down tool included
    Yes — an LSA Plus punch-down tool is listed in the first bullet, named by its blade family rather than described in general terms
    Kit contents
    One RJ45 crimping tool, 20 pass-through plugs stated as Cat7 and Cat6a, 20 boots, one stripping tool, one wire cutter, one LAN tester, one LSA Plus punch-down tool and a zipped bag — stated. The third bullet gives the plug contacts a gold plating of 50 microns
    Amazon reference
    B0GWDRVHW5 (same reference on 6 Amazon marketplaces)
    EAN
    0753504441908
    • The plugs in the box are pass-through, matching what the tool is built to finish
    • The punch-down tool is named by its blade family instead of being left generic
    • The three jobs of the crimping tool are never named, leaving two lines here empty

    Best for: A first pass-through kit, where the tool, the plugs and the punch-down tool all arrive matched in one bag.

    ≈ £37 / 30 €
    Check price on Amazon
  • Fortura RJ45 crimping tool with plugs, insertion guides, boots and a replacement blade

    Fortura All-in-one crimping tool with twenty plugs, twenty guides, twenty boots and a spare blade

    The one kit in this hub that ships a replacement blade, packed with twenty plugs split across two categories and twenty insertion guides — and the dearest tool on the shelf.

    Connector positions supported
    Not published on the listing — the second bullet names cable categories and connector families instead: Cat5, Cat6, Cat6a and Cat7, with RJ11 and RJ12 telephone plugs. No position count is printed
    Pass-through capability
    Not published on the listing — the third bullet describes an optimised crimping mechanism and firm, loss-free connections, and never mentions trimming conductors at the front of a plug
    Ratchet action
    Not published on the listing — the optimised crimping mechanism in the third bullet is named without any lock, ratchet or release being described
    Integrated stripper
    Yes — stated in the first bullet as cutting, stripping and crimping with a single tool
    Integrated cutter
    Yes — stated in the same phrase as the cutting function of the tool
    Replaceable blades
    Yes — a replacement blade is listed in the fourth bullet among the accessories supplied. It is the only spare blade in this hub, and the trimming edge is the part of a tool of this kind that dulls first
    Punch-down tool included
    Not published on the listing — no punch-down or insertion tool appears among the accessories, and modules and panels are never mentioned
    Kit contents
    Ten Cat6a plugs, ten Cat7 plugs, twenty insertion guides, twenty boots, a replacement blade and a storage bag — stated in the fourth bullet. The fifth describes a solid metal frame and a non-slip grip that can be worked single-handed
    Amazon reference
    B0D5MCDFCD (same reference on 3 Amazon marketplaces)
    EAN
    4260751370272
    • The only kit in this hub with a spare blade in the box
    • Twenty insertion guides, one per plug, rather than a handful
    • No position count anywhere, only category and connector names

    Best for: Terminating plugs across two categories of cable, by someone who already owns a tester and a punch-down tool.

    ≈ £42 / 40 €
    Check price on Amazon
  • KNIPEX crimping tool with ratchet mechanism and integrated cable knives

    KNIPEX Ratcheting parallel-crimp tool with a releasable lock and integrated cable knives

    The only tool on this shelf that describes its own mechanism in detail — a parallel crimp held by a releasable lock — and the only one that never names a single connector it terminates.

    Connector positions supported
    Not published on the listing — the four bullets describe cutting, stripping and crimping, and name no connector, no position count and no category of plug. It is the only tool on this shelf that leaves the question entirely unanswered
    Pass-through capability
    Not published on the listing — no trimming blade at the front of the die is described, and the term never appears
    Ratchet action
    Yes — stated in the third bullet as a forced lock that can be released, credited with keeping crimp quality consistently high. The fourth bullet adds a lever transmission for less tiring work
    Integrated stripper
    Yes — stated in the first bullet as fast cutting to length and stripping of Cat cable by means of high-grade knives
    Integrated cutter
    Yes — stated in the same bullet, as the cutting-to-length function of those knives
    Replaceable blades
    Not published on the listing — the knives are described as high-grade and nothing says whether they can be changed when they dull
    Punch-down tool included
    Not published on the listing — this is a single tool rather than a kit, and no punch-down function or accessory is described
    Kit contents
    Not published on the listing — the four bullets describe the tool alone and name nothing supplied with it. No plugs, no boots, no tester and no bag appear
    Amazon reference
    B000NI2RH8 (same reference on 6 Amazon marketplaces)
    EAN
    4003773043171
    • The ratchet is named and its release is named, which nothing else on this shelf does
    • A parallel crimp is described as the mechanism, rather than a crimp being asserted
    • No connector, position count or plug category is named anywhere on the page

    Best for: Someone who already knows which plugs this tool takes and wants the mechanism rather than the bag around it.

    ≈ 24 €
    Check price on Amazon

Others worth having spare

  • UGREEN black dual-bay drive docking station with two slots and a clone button

    UGREEN dual-bay SATA dock, USB 3.0 at 5 Gbps, offline clone, UASP, S.M.A.R.T. and TRIM, 2 × 16 TB

    A two-bay dock that puts the cloning rule in bold inside its own first bullet — the destination has to exceed the source — and publishes three protocols where most docks publish one.

    Bay count
    Two — stated in the title and in the second bullet, which describes simultaneous operation of two 2.5-inch or 3.5-inch drives for synchronous data transfer
    Supported drive sizes
    2.5-inch and 3.5-inch — stated in the first and second bullets
    Supported drive interfaces
    SATA hard discs and solid-state drives — stated in the first and second bullets. No SATA revision is named
    Solid-state slot support
    Not published on the listing — no M.2 position is named. Solid-state drives are supported in the two SATA bays and no separate slot exists
    Offline cloning
    Stated — the first bullet describes fast copying between two drives at a single button press with no computer connected, and adds in a marked note that the capacity of destination drive B must exceed that of source drive A
    Interface standard
    USB 3.0 — stated in the title and in the third bullet
    Stated link rate
    Up to 5 Gbps — stated in the title and in the third bullet, which calls it a theoretical transfer speed
    Connector type
    Not published on the listing — no socket and no cable is named in any bullet
    UASP support
    Stated — the third bullet names UASP, S.M.A.R.T. and TRIM together as the protocols supported. It is one of two docks on this shelf to name all three
    Power supply
    Not published on the listing — no adapter, no voltage and no current is named, on a dock stated to run two 3.5-inch drives at once
    Per-bay controls
    Not published on the listing — no power switch and no per-bay indicator is named in any bullet
    Amazon reference
    B0FPM32XNZ (same reference on 5 Amazon marketplaces)
    EAN
    6941876284924
    • Puts the capacity rule for cloning inside the cloning bullet, in a marked note
    • UASP, S.M.A.R.T. and TRIM all three published
    • No power supply named, on a dock built for two 3.5-inch drives

    Best for: Moving a system onto a larger drive, where the capacity rule in the first bullet is exactly the thing that has to be got right.

    ≈ 24 €
    Check price on Amazon
  • Xiaobi dual-bay drive docking station with RGB lighting and two drive slots

    xiaobi dual-bay SATA dock, USB-C and USB-B, USB 3.0 at 5 Gbps, offline copy, RGB switch

    The dock that describes its own failure state — four blue lights blinking means the copy did not work — and the only one here with a switch to turn its lighting off.

    Bay count
    Two — stated in the title and in the first bullet, which describes two SATA drive interfaces alongside a Type-C socket, a USB-B socket and separate power and RGB buttons
    Supported drive sizes
    2.5-inch and 3.5-inch — stated in the title and in the third bullet
    Supported drive interfaces
    SATA hard discs and solid-state drives — stated in the third bullet. No SATA revision is named
    Solid-state slot support
    Not published on the listing — no M.2 position is named. Solid-state drives are supported in the two SATA bays and no separate slot exists
    Offline cloning
    Stated — the second bullet describes copying from one SATA drive to another with a switch and no software or tools, and adds three marked notes: use a larger destination, disconnect the PC during the copy, make sure the destination capacity is at least as large as the source, and read four blinking blue LEDs as a failed copy
    Interface standard
    USB 3.0 — stated in the fourth bullet as supporting extremely fast USB 3.0 data transfer
    Stated link rate
    Up to 5 Gbit/s — stated in the fourth bullet
    Connector type
    A Type-C socket and a USB-B socket on the dock, with a USB-B to USB-C cable and a USB-A adapter supplied — stated in the first and sixth bullets. It is the only dock on this shelf to publish both its sockets and its cable
    UASP support
    Not published on the listing — UASP is not named anywhere in the six bullets. Fourteen of the nineteen listings in this lot publish it, so the silence is worth noticing
    Power supply
    Not published on the listing — no adapter, no voltage and no current is named, on a dock stated to take two 3.5-inch drives
    Per-bay controls
    Separate power and RGB buttons are stated in the first bullet, with the RGB switch on the rear named again in the fifth. Neither is per-bay: no individual bay switch and no per-bay indicator is published
    Amazon reference
    B0GGR3P52T (same reference on 6 Amazon marketplaces)
    EAN
    0635393178823
    • Describes the failure signal, four blinking blue lights, which nothing else in this lot does
    • Publishes both its sockets and the cable and adapter supplied
    • Two capacity figures in one bullet, 16 TB each and 20 TB for a single drive

    Best for: A desk where drives are copied often and the operator wants to know from across the room whether it worked.

    ≈ $35 / £27 / 25 €
    Check price on Amazon
  • BENFEI black 2.5-inch SATA drive enclosure with a slide-off cover and a USB-C plug

    BENFEI 2.5-inch SATA enclosure, USB C 3.2 Gen 2 and Type-A, UASP, 7 and 9.5 mm, 18-month warranty

    The cheapest enclosure in this hub, with a plug of each kind on the end of it and a drive that slides in behind a cover — and a headline rate that is quoted two different ways.

    Supported drive size
    2.5-inch SATA I, II and III drives — stated in the title and in the first bullet, which names transferring files between computers, to a PS4 or as an external USB drive as its uses. The fourth gives a ceiling of 6 TB
    Supported drive height
    7 mm and 9.5 mm — stated in the fourth bullet, which says the enclosure is specifically designed for 2.5-inch drives of those two thicknesses
    Bay count
    One — a single 2.5-inch drive, described in the third bullet as slid in behind a cover that is pushed out and closed again
    Interface standard
    USB C 3.2 Gen 2, with a Type-A plug as well — stated in the title. The second bullet adds backward compatibility with USB 2.0 and 1.1 ports
    Stated link rate
    Two figures are published. The title gives up to 6 Gbps; the second bullet gives up to 5 Gbit/s with UASP SATA III support. Neither is withdrawn and the listing does not reconcile them
    Connector type
    Type-C and Type-A — stated in the title and in the third bullet, which describes the plug design as making connection to a laptop, a phone or a tablet straightforward
    Power source
    From the lead — no mains adapter is named anywhere, which is the ordinary arrangement for a 2.5-inch enclosure. No current figure is published
    Case material
    Not published on the listing — no aluminium, no ABS and no plastic is named in any of the five bullets
    Cooling
    Not published on the listing — no fan, no vent and no heat statement appears. The third bullet describes the cover sliding out and the drive going in, and the material that would carry the heat is not named either
    UASP support
    Stated — the second bullet names UASP SATA III support and claims it is 70 % faster than conventional USB 3.0. The same maker’s docking station on the docks shelf of this site puts the figure at 20 %
    Tool-free access
    Tool-free — the third bullet describes sliding the cover out, plugging the drive in, closing the cover and starting, and adds that the enclosure is hot-swappable
    Amazon reference
    B0C73VYQCW (same reference on 6 Amazon marketplaces)
    EAN
    6971785942868
    • Both plug types on the enclosure, so no adapter is needed for an older machine
    • Publishes both supported drive heights rather than only the thicker one
    • Six gigabits in the title and five in the bullets, with nothing reconciling them

    Best for: A spare laptop drive being turned into a pocket disc, on a household with machines of two different ages.

    ≈ $10 / £7 / 8 €
    Check price on Amazon

All crimping tools