Skip to content

BIGtec 10 m Cat 7 cord, S/FTP PIMF, copper named, length printed on the boot

The cord on this shelf whose screening is written as a code rather than as a letter or two, with copper named for the conductor and the length printed on the boot so a bundle can be read a year later.

BIGtec white 10 m Cat 7 patch cable with blue shielded RJ45 plugs and moulded boots

BIGtec 10 m Cat 7 cord, S/FTP PIMF, copper named, length printed on the boot

The cord on this shelf whose screening is written as a code rather than as a letter or two, with copper named for the conductor and the length printed on the boot so a bundle can be read a year later.

Category
Cat 7 — stated in the title and in three bullets, with claimed compatibility downward and upward to Cat 5, Cat 5e, Cat 6 and Cat 6A. No operating frequency is printed anywhere on the page
Conductor material
Copper — stated in the first bullet, which calls the cord a copper cable, and again in the third, which names a high-grade inner conductor. No purity figure and no strand count are given
Conductor construction
Not published on the listing — the maker names the pairs as twisted and screened individually, and never says whether each conductor is a single core or a bundle of strands
Shielding code
S/FTP with PIMF — stated in the title, and explained in the first bullet as one screen per pair inside one overall screen. It is the only shielding statement on this shelf written as a code with its arrangement spelled out beside it
Length
10 m — stated in the title, and printed on the cord itself: the third bullet says the length is marked at the plug, and the fourth says it appears on the boot
Sheath material
Not published on the listing — the outer jacket is given a colour, white, and never a material
Boot type
A moulded strain-relief boot with a latch guard — stated in the third and fourth bullets, which name both the kink protection and a guard over the retaining tab
Connector plating
Gold-plated contact surfaces — stated in the third and fourth bullets, on shielded RJ45 plugs the fourth bullet describes as blue. No plating thickness appears
Amazon reference
B00IHIZK9S (same reference on 5 Amazon marketplaces)
EAN
4051687014367
  • The shielding is written as a code and then explained, rather than left as three capital letters
  • Copper is named for the conductor, which two cords on this shelf never do
  • No operating frequency, so the category stands on its own with no number behind it

Best for: A cabinet or a run behind a desk where cords get traced by hand later, and where a screened cable is meeting screened hardware at both ends.

≈ 10 €
Check price on Amazon

Specifications

Category
Cat 7 — stated in the title and in three bullets, with claimed compatibility downward and upward to Cat 5, Cat 5e, Cat 6 and Cat 6A. No operating frequency is printed anywhere on the page
Conductor material
Copper — stated in the first bullet, which calls the cord a copper cable, and again in the third, which names a high-grade inner conductor. No purity figure and no strand count are given
Conductor construction
Not published on the listing — the maker names the pairs as twisted and screened individually, and never says whether each conductor is a single core or a bundle of strands
Shielding code
S/FTP with PIMF — stated in the title, and explained in the first bullet as one screen per pair inside one overall screen. It is the only shielding statement on this shelf written as a code with its arrangement spelled out beside it
Length
10 m — stated in the title, and printed on the cord itself: the third bullet says the length is marked at the plug, and the fourth says it appears on the boot
Sheath material
Not published on the listing — the outer jacket is given a colour, white, and never a material
Boot type
A moulded strain-relief boot with a latch guard — stated in the third and fourth bullets, which name both the kink protection and a guard over the retaining tab
Connector plating
Gold-plated contact surfaces — stated in the third and fourth bullets, on shielded RJ45 plugs the fourth bullet describes as blue. No plating thickness appears
Amazon reference
B00IHIZK9S (same reference on 5 Amazon marketplaces)
EAN
4051687014367

On the listing

A 10 m Cat 7 patch cable in white, described as a copper cable, double screened to S/FTP with PIMF — one screen per pair inside one overall screen; claimed compatibility both downward and upward with Cat 5e, Cat 5, Cat 6 and Cat 6A components; two shielded RJ45 plugs in blue with gold-plated contact surfaces, a moulded strain-relief boot, a guard over the retaining tab, and the length marked at the plug and on the boot; a high-grade inner conductor; and a list of what the maker sees it feeding, from switches and patch panels to consoles, network printers and print servers.

S/FTP and PIMF, printed as a code

This is the only cord on the shelf whose screening arrives as a code with its meaning attached. Two of the seven say STP, one says SFTP, one says triple-screened SF/FTP, and this one says S/FTP PIMF and then spends a bullet explaining that it means a foil around each pair inside a screen around the bundle.

That is worth something for a specific reason. A screen is only continuous if everything it touches is screened as well, and it needs a path to earth to be more than a metal jacket. Knowing which layers exist is the first half of deciding whether a screened cord belongs on a particular link at all; the second half is what is at each end of it, which no cable listing can tell you.

Copper on the label, construction left off it

The first bullet calls it a copper cable and the third names a high-grade inner conductor. That is more than half this shelf publishes, and it settles the question the buying tip for this hub raises — whether the metal is copper or copper-clad aluminium, which is normally answered only in the small print.

What it does not settle is solid against stranded. The bullets talk about professional work in a cabinet and about servers, which is language from the fixed-run side of the house, and a fixed run wants solid conductors terminated into a panel. But the product is sold as a patch cable, and a patch cable wants stranded, because stranded is what survives being coiled and moved. The listing does not choose, so this line does not choose for it.

The boot, and the figure printed on it

Two mechanical details are named and both are the sort that only matter later: a moulded strain-relief boot, and a guard over the retaining tab so the tab does not snap off against a bundle. The third feature is the useful one. The length is printed at the plug and on the boot, which means a cord pulled out of a drawer identifies itself, and a cord traced in a cabinet identifies itself too.

Before ordering

Decide first whether the link is screened end to end — screened cable into unscreened sockets buys nothing at all. Then read the plugs at both ends of the run rather than this page: the listing says the cord suits cabinets and patch panels and also consoles and televisions, which are two different jobs, and the conductor construction that would separate them is the one line it does not print.

Availability

Priced from 10 € to 16 € across the German, French, Italian and Spanish Amazon stores the day this page was checked.

It is stocked on the British Amazon store as well, in that country’s own currency. The range above leaves those out: it counts euro stores and no others.

The American Amazon store returned nothing at all, so the buy button there opens a search in that country rather than a page that would not load.

Every figure in this section is what Keepa held on the day this page was last updated. Stock and prices move without warning.

Prices quoted in this text were read on 10 September 2026. The live price is at the top of the page.

All patch cables