Publishes a power draw, an ambient limit and ten makers it will not work with
10Gtek 10GBASE-T copper SFP+, 30 m stated, Marvell AQR113C named, 2.5 W draw
The copper module that tells you what it costs in watts and where it gets too warm, and then prints ten maker names it will not work with — the only listing on this shelf that spends a bullet on its own limits.
Specifications
- Module form factor
- SFP+ — stated in the title, and the first bullet asks that the transceiver be used in a 10G SFP+ port rather than a gigabit one
- Module rate
- 10 Gb/s — stated in the first bullet as the data rate, and carried by the 10GBase-T designation in the title
- Optical or copper medium
- Copper — stated in the title, which calls it a copper transceiver with an RJ45 socket
- Fibre type
- Not published on the listing, and a copper module has no fibre to qualify. The second bullet names the cable instead: CAT.6a or CAT7 RJ45 cable, quoted in the same line as the reach
- Stated reach
- Up to 30 m — stated in the title and in the second bullet, in both cases against the Cat 6a or Cat 7 cable named beside it
- Connector type
- RJ45 — stated in the title as the socket the module presents
- Wavelength
- Not published on the listing, and copper carries none. The fifth bullet names the Marvell AQR113C PHY controller in its place and calls it the latest of its kind
- Vendor coding stated
- Compatibility is claimed for Cisco, Meraki, Ubiquiti except the US-48-500W, Mikrotik, Netgear, Zyxel, QNAP NAS, Synology, D-Link, TP-Link, Supermicro and other open switches. The fourth bullet then names ten makers it is not compatible with: HP-ProCurve, HP-H3C, HP-Aruba, Intel, Arista, Mellanox, Dell Force10, Extreme, Brocade and Juniper
- Operating temperature range
- Not published on the listing as a range — the fifth bullet states instead that the module can become hot in use because the integrated circuit draws 2.5 W, and recommends using it where the ambient temperature stays below 50 °C
- Amazon reference
- B01M8O3MAL (same reference on 6 Amazon marketplaces)
- EAN
- 0603149410633
On the listing
A copper ten-gigabit transceiver, 10GBase-T, with an RJ45 socket in an SFP+ cage, a data rate of 10 Gb/s and a request that it be used in 10G SFP+ ports; a cable type given as CAT.6a or CAT7 RJ45 with a reach of up to 30 m; compatibility claimed for Cisco, Meraki, Ubiquiti with the US-48-500W excluded, Mikrotik, Netgear, Zyxel, QNAP NAS, Synology, D-Link, TP-Link, Supermicro and other open switches; a list of ten makers it is stated not to be compatible with; and a Marvell AQR113C PHY controller, with a note that the module can become hot in use because the integrated circuit draws 2.5 W, and a recommendation to use it where the ambient temperature stays below 50 °C.
2.5 watts inside a sealed cage
One number on this page explains the behaviour of an entire product category, and only one listing in this hub prints it. The integrated circuit draws 2.5 W.
That is what turning ten gigabits into voltages on a twisted pair costs. It is dissipated inside a metal shell with no airflow of its own, pressed against neighbouring cages in a switch that was designed around transceivers drawing a fraction of it.
The maker follows the figure with the sentence that matters: use it where the ambient temperature is below 50 °C. That is not an operating range, and this page does not pretend it is one. It is a recommendation, and it is the only thermal guidance anywhere on this shelf.
The ten makers named as incompatible
HP-ProCurve, HP-H3C, HP-Aruba, Intel, Arista, Mellanox, Dell Force10, Extreme, Brocade, Juniper.
A seller does not write that list for fun. Each name on it is a market being declined, and the reason is always the same: the switch reads a code, does not like what it reads, and either refuses the module or fills a log with complaints about it.
There is a second exclusion hidden in the compatible list, and it is finer still — Ubiquiti equipment generally, except the US-48-500W. A single model, carved out by name. That is the level of detail that comes from returns rather than from a datasheet.
Cat 6a or Cat 7, and 30 metres
The cable statement here is short and it does not contradict itself, which distinguishes it from the other copper module on this shelf.
CAT.6a or CAT7, up to 30 m. One requirement, one distance, printed together in the same bullet so that neither can be read without the other. Nothing is said about what happens on lesser cable, which is a gap rather than a conflict, and a buyer with Cat 6a already in the wall has everything the page owes them.
Before ordering
Check your switch against the fourth bullet before anything else — ten makers are ruled out by name, and three of them are HP families. Then think about where the cage sits: 2.5 W with no airflow is the reason this module comes with an ambient recommendation at all. And confirm the run is Cat 6a or Cat 7 over its full length, since that is the only cable this page will speak for.
Availability
Priced from 36 € to 42 € across the German, French, Italian and Spanish Amazon stores the day this page was checked.
It is stocked on the British Amazon store as well, in that country’s own currency. The range above leaves those out: it counts euro stores and no others.
In the American Amazon catalogue with no live offer against it: the reference exists, nobody is filling it.
Every figure in this section is what Keepa held on the day this page was last updated. Stock and prices move without warning.
Prices quoted in this text were read on 10 September 2026. The live price is at the top of the page.