The only access point here to publish a stream count, and the only one whose maker calls its headline figure an aggregate radio rate — which is exactly what it is.
The Amazon.com listing is a title — “Ubiquiti U6-LITE UniFi 6 Lite Wi-Fi 6 Dual Band Wireless Access Point” — and one paragraph: a 2×2 Wi-Fi 6 access point delivering up to 1.5 Gbit/s of aggregate radio rate from a 5 GHz radio with MU-MIMO and OFDMA and a 2.4 GHz radio with MIMO, mounted horizontally in the ceiling for a high-density area or vertically on a wall to extend reach, in a nano-sized body that takes nanoHD covers and mounting accessories. Ubiquiti’s own spec page supplies the rest: one Gigabit port, PoE at 44–57 V and 12 W at most, 160 × 33 mm (6.3 × 1.3 in), 300 g.
The words the maker chose
Aggregate radio rate. Not up to 1.5 Gbit/s of speed, not a rate the unit provides — an aggregate. That is the honest name for a number produced by adding two radios together, and this site would use the same word.
2×2 MIMO. Two spatial streams. With the generation and the channel width, that is what a class figure is calculated from, and it is published here and nowhere else in this family.
The title that stops
The product title ends: Wi-Fi 6 with — and nothing follows. Whatever was to be listed after that word is absent from the page, and we have not guessed at it.
The blank where the controller should be
UniFi is a controller-managed product line. The listing names it in the product name and describes no controller, no web interface, no app and no cloud service. A buyer who already runs one will know what to do; a buyer who does not is given nothing.
Before ordering
Check the PoE class against the switch. Its 12 W maximum is within what the lowest PoE class, 802.3af, guarantees at the device, which makes this the least demanding of these four to install — provided there is somewhere for it to register.
Where it holds up, and where it stops
Strengths
Publishes a stream count, 2×2, which no other access point in this family does and which is what a class figure is built from
Describes both mounting positions and what each is for, rather than naming a bracket and stopping there
Ubiquiti's spec page gives the PoE input as 44–57 V and 12 W at most, within what an 802.3af port guarantees at the device
Compromises
The title stops mid-sentence after the word with, so whatever the maker meant to add is missing from the page
No management method is described at all, on a product line whose whole reputation rests on its controller
The two radios are named without individual rates, so what the 1.5 Gbit/s is composed of has to be taken on the aggregate
Specifications
Wi-Fi generation
Wi-Fi 6 — stated in the title and in the description
IEEE designation
Not published — neither the Amazon.com listing, which is a title and one description paragraph, nor Ubiquiti's spec page prints an 802.11 letter pair
Stated class figure
Up to 1.5 Gbit/s — stated, and called by the maker an aggregate radio rate, which is what a class figure is: the peaks of the separate radios added together. No AX badge is printed
Band plan
Two radios — 5 GHz with MU-MIMO and OFDMA and 2.4 GHz with MIMO, stated in the description; Ubiquiti's spec page gives 1.2 Gbit/s at 5 GHz on 80 MHz and 300 Mbit/s at 2.4 GHz on 40 MHz
Stream count
2×2 — stated in the description and on Ubiquiti's spec page for each band, four spatial streams in all; the only stream count published among the four listings here
PoE standard required
PoE at 44–57 V DC, 12 W maximum — on Ubiquiti's spec page, which names no 802.3 designation; the Amazon.com listing does not mention PoE at all
Uplink port speed
Gigabit — one GbE RJ45 port on Ubiquiti's spec page; not stated on the Amazon.com listing
Mounting type
Ceiling or wall — stated in the description with the reason for each, horizontally in the ceiling for a high-density area or vertically on a wall to extend reach; Ubiquiti lists the mounts as included
Management method
Not published on the Amazon.com listing — the UniFi name appears in the title and no controller, app or cloud service is described
Amazon reference
B08T6CKG5B
EAN
0810010073303
On Amazon.com
Amazon.com had an offer at $160 on October 26, 2026.
The questions that come up before an order
What does an aggregate radio rate mean?
It means the rates of the separate radios added together. It is the same quantity a maker usually prints as an AX badge, expressed in the words that describe the arithmetic. It is not a rate a client reaches, because no client is on both radios at once.
Why is a 2×2 stream count useful to know?
Because it is one of the two inputs to any class figure, the other being channel width. Given 2×2 and Wi-Fi 6, the 1.5 Gbit/s aggregate can be traced back to the standard rather than taken on trust, which is not possible on the three listings here that omit it.
Our score
8.4/ 10
The most precise vocabulary of the four — aggregate radio rate, 2×2 MIMO — on the shortest Amazon.com listing, a title and one paragraph, with the power and port figures left to Ubiquiti's own spec page.
Against the rest of the network and storage gear
This network and storage gear share the category and the price bracket. Only what each one states is shown; an incomplete column would mislead.
Model
Price
Wi-Fi generation
IEEE designation
Stated class figure
Band plan
Ubiquiti Networks UniFi 6 Lite, 2×2 Wi-Fi 6 access point
$160
Wi-Fi 6 — stated in the title and in the description
Not published — neither the Amazon.com listing, which is a title and one description paragraph, nor Ubiquiti's spec page prints an 802.11 letter pair
Up to 1.5 Gbit/s — stated, and called by the maker an aggregate radio rate, which is what a class figure is: the peaks of the separate radios added together. No AX badge is printed
Two radios — 5 GHz with MU-MIMO and OFDMA and 2.4 GHz with MIMO, stated in the description; Ubiquiti's spec page gives 1.2 Gbit/s at 5 GHz on 80 MHz and 300 Mbit/s at 2.4 GHz on 40 MHz
Wi-Fi 6 — stated in the title and in the second bullet
Not published on the listing for the radio — 802.3at is named for power, and no 802.11 letter pair is printed for the Wi-Fi generation itself
AX3000 on the title, and 2976 Mbit/s in the first bullet — the listing publishes the sum itself, 574 Mbit/s at 2.4 GHz plus 2402 Mbit/s at 5 GHz, rather than only the rounded badge
Two radios, each with a rate — 2.4 GHz at 574 Mbit/s and 5 GHz at 2402 Mbit/s, simultaneous, with a 160 MHz channel named as HE160
Wi-Fi 6 — stated in the title and in the first bullet
Not published on the listing for the radio — 802.11r, 802.11k and 802.11v are named for fast roaming, and no 802.11 letter pair is given for the Wi-Fi generation itself
AX3000 — stated, quoted by the maker as a total throughput of 3000 Mbps with 160 MHz channel support. It is the sum of the theoretical peaks of the radios in the unit, and the listing does not divide it between them
Not published on the listing — neither the number of radios nor their frequencies is named; the 4G and 5G in the last bullet refer to filtering cellular interference, not to a Wi-Fi band
What separates the models, in network and storage gear
If price decides: ZYXEL NWA50AXPRO, Wi-Fi 6 access point with a 2.5G uplink, at $114.
The buyer this one serves, among network and storage gear
A ceiling or wall position on a network where the controller already exists, and where a PoE switch is already in the cupboard.
What this one costs among network and storage gear
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Specifications: the manufacturer sheet for network and storage gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Wi-Fi 6 · AX3000 over 2976 published · both bands rated · PoE+ with an adapter in the box · wall or ceiling, 176 mm (6.93 in) disc · 150 m² (1,615 sq ft)
The most completely specified access point here: both band rates, both power routes, a mounting choice and a measured body, with only the stream count left out.
Best for: A flat, office or cafe of about 150 m² (1,615 sq ft) wanting one well-documented ceiling unit that will run from a plug if no PoE switch exists.
Wi-Fi 6 · 2976 Mbit/s published as the sum · 802.3at PoE+ named, adapter supplied · Gigabit uplink · Omada SDN · 160 mm (6.30 in), 33.6 mm (1.32 in) deep
The one listing in the whole lot that prints the sum of its two radios rather than the rounded badge — 2976 Mbit/s, in the first bullet.
Best for: A small site that intends to run several access points under one controller, and wants the power class named before ordering the switch.
