A repeater trades throughput for reach, and the listing rarely says so · review
FRITZ FRITZ!Repeater 1200 AX, Wi-Fi 6 mesh repeater with a Gigabit socket review
A Wi-Fi 6 repeater whose headline figure is exactly the sum of its two published band rates, and whose product name carries a number the page never explains.
The bottom line Clean arithmetic, a named repeating mechanism and a full box list, against a product name that contradicts its own figure. For a mesh built from this maker equipment it says nearly everything; the unnamed access point mode is the one line to check.
On the listing
Wi-Fi 6 across the home network with intelligent automatic band selection described as cross-band repeating, on a 5 GHz band up to 2400 Mbit/s and a 2.4 GHz band up to 600 Mbit/s; Wi-Fi 6 designed for a demanding home network with many devices in use at once; support for 160 MHz wide channels for wireless up to 3000 Mbit/s, and a Gigabit LAN connection for building a wired bridge or for network devices without a radio; mesh joining several access points into one intelligent network with installation at the press of a WPS button; and a box containing the repeater, an instruction leaflet, a network cable and an earthed socket adapter.
The arithmetic that closes
2400 plus 600 is 3000. The bullet says up to 3000 Mbit/s. Nothing is rounded, and both the parts and the sum are printed. Two products in this lot manage that, and both carry this maker name.
The number in the name
1200 in the product name, 3000 in the third bullet. The same pattern appears on this maker mesh set elsewhere in this lot, where the name says 1600 and the figure says 3000. It is a house convention rather than an error, and the page does not explain it.
Cross-band repeating
Named, and it is the mechanism worth naming. A repeater with one radio spends its air time twice, receiving and sending on the same band. Choosing the other band for the outbound half is what avoids that, and this listing states the unit does it automatically.
The socket, and the words around it
One Gigabit socket, offered for a LAN bridge or for a device with no radio of its own. What is not offered, in words, is an access point mode. The two arrangements overlap in practice and the listing describes only one of them.
Before ordering
Check the router. Mesh here means the maker’s own mesh, and the value of this unit is highest on a network already built from the same catalogue.
Availability
Priced from 83 € to 130 € across the German, French, Italian and Spanish Amazon stores the day this page was checked.
It is stocked on the American Amazon store as well, in that country’s own currency. The range above leaves those out: it counts euro stores and no others.
In the British Amazon catalogue with no live offer against it: the reference exists, nobody is filling it.
Every figure in this section is what Keepa held on the day this page was last updated. Stock and prices move without warning.
Prices quoted in this text were read on 10 September 2026. The live price is at the top of the page.
Where it holds up, and where it stops
Strengths
The headline figure is exactly the sum of the two published band rates, with nothing rounded upward
Names cross-band repeating and automatic band selection, which is the mechanism that stops a repeater spending its air time twice on one radio
Lists the box contents in full, down to the network cable and the earthed socket adapter
Compromises
The product name says 1200 and the published figure says 3000, and the page reconciles neither
No access point mode is named; the socket is offered for a LAN bridge, which is a different arrangement described in different words
No stream count, so the 2400 Mbit/s cannot be traced through the 160 MHz channel to a number of streams
Specifications
Wi-Fi generation
Wi-Fi 6 — stated in the title, and written WLAN AX in the third bullet
IEEE designation
Not published on the listing — five bullets cover the bands, the design intent, the channel width and socket, mesh, and the box contents, and no 802.11 letter pair appears
Stated class figure
Up to 3000 Mbit/s — stated with the 160 MHz channel support that produces it, and it is exactly the sum of the two published band figures: up to 2400 Mbit/s at 5 GHz and up to 600 Mbit/s at 2.4 GHz. No AX badge is printed, and the 1200 in the product name is not explained
Band plan
Two radios, each with a rate — 5 GHz up to 2400 Mbit/s and 2.4 GHz up to 600 Mbit/s — with cross-band repeating choosing the band automatically
Stream count
Not published on the listing — the 160 MHz channel width is named as the mechanism behind the figure, and the number of streams is not
Plug-in or desktop form
Not published on the listing in words — an earthed socket adapter appears among the box contents, and no bullet describes the body as plugging into a socket or standing on a surface
Ethernet port count
One — stated as a Gigabit LAN connection, for building a wired bridge or for network devices without a wireless radio
Port speed
Gigabit — stated for the single LAN connection, without the 1000BASE-T designation behind the word
Access point mode
Not published on the listing as a named mode — the Gigabit socket is stated to serve for building a LAN bridge, which is the wired arrangement, and the words access point are not used
Amazon reference
B09N4SJLWM (same reference on 6 Amazon marketplaces)
EAN
4023125029745
The questions that come up before an order
What does cross-band repeating do?
It lets the unit receive on one band and retransmit on the other, so the same radio is not doing both jobs on the same air time. It is the difference between a repeater that halves what passes through and one that does not, and this listing names it and states that the band selection is automatic.
Is a LAN bridge the same as an access point mode?
They are related and not identical. A LAN bridge carries the network across the cable between two points; an access point mode takes a cable and raises a wireless network from it. The listing states the first and never uses the words for the second, so we have recorded it that way.
1200 Mbit/s badge, and 900 plus 300 published · four antennas · repeater, router and AP modes · 15 devices · no Ethernet socket anywhere
A dual-band repeater whose two published rates add up to its badge exactly, and which offers a router mode without naming an Ethernet socket anywhere on the page.
Best for: A wireless-only extension where nothing needs a cable and the badge arithmetic matters more than the brand.
Wi-Fi 6 · AX1500 over 1501 published · plug-in, stated · one Gigabit socket · repeater or access point mode · no mesh, stated
A plug-in Wi-Fi 6 repeater that states its socket, its form and its two modes — and closes with a bullet saying a repeater extends coverage rather than speed.
Best for: A flat or medium-sized house wanting one plug-in unit with a wired socket for a television, and a maker prepared to say what a repeater cannot do.